BENEFITS

PROMOSOLV DR3 is especially designed to replace rinsing solvents with a high HSE impact and to offer a product in accordance with the latest and future environmental regulations. The very low surface tension allows to penetrate very tight or difficult to access spaces, making sure any cleaning chemistry is fully removed.

It can be used in combination with our TOPKLEAN^TM range in co-solvent cleaning process to offer an environmentally friendly solvent solution for degreasing without compromising on high cleaning performance. PROMOSOLV DR3 can also be used to remove fluorinated & silicon oils or for particles removal in a vapor phase or flushing cleaning process.

PROMOSOLV DR3 is compatible with all metals and alloys, including very sensitive ones. It has also good compatibility with most plastics & elastomers, however it is necessary to test before use.

PROMOSOLV DR3 is formulated with safety in mind, which resulted in a product that is non-flammable and has no flash point.

This product also exists in a recycled version (made from recycled solvent) under the name PROMOSOLV DR3 T

PERFORMANCE	Thermally and chemically stable in use The very low surface tension allows deep cleaning & rinsing of parts with complex geometry Short cleaning, rinsing and drying times
COST	Continuous recycling in equipment for a long bath-life Can be returned for recycling and re-use The relative high boiling point reduces risk of solvent drag, so limiting consumption
HSE	Low Global Warming Potential (GWP) No Ozon depletion potential (ODP) Non-flammable & no flashpoint Low environmental impact: GREENWAY product

SPECIFICATIONS

SPECIFICATIONS	VALUES	METHODS
Aspect	Transparent, colorless	Visual
Purity (% weight)	> 99,5	Internal / BRY-MO-121

CHARACTERISTICS

CHARACTERISTICS	VALUES
Boiling point (°C/°F)	61°C / 142°F
Freezing point (°C/°F)	-135°C / -211°F
Flash point	No
Density (g/cm3)	1.52
Surface tension (dynes/cm)	13.6
Vapor pressure (mm Hg)	202
Dynamic viscosity (mPa.s)	0.75
Latent heat of vaporization (kJ/Kg@bp)	112
Specific heat (kJ/Kg.K)	1.17

PROCESS RECOMMENDATION

The best process will depend on factors such as operating conditions, equipment, desired cleaning time and the nature of contaminants. Our team is ready to advise you.

PROCESS EXAMPLE

Separated Co-Solvent process:

• TOPKLEAN MC 20A
  Conc: 100%
  Tem: 47°C/116°F
  US: optional
  Time: 5-10 min

  CLEANING

• PROMOSOLV DR3
  Conc: 100%
  Temp: 62°C/144°F
  US: optional
  Time: 2-5 min

  RINSING

• PROMOSOLV DR3
  Conc: 100%
  Temp: 48°C/118°F
  US: optional
  Time: 2-5 min

  RINSING

• DRYING
  Conc: 100% DR3 vapor
  Temp: 61°C/142°F
  
  Time: 5-60 sec

  DRYING ZONE

Vapor phase process:

• PROMOSOLV DR3
  Conc: 100%
  Temp: 61°C/142°F
  US: optional
  Time: 5-10 min

  CLEANING

• PROMOSOLV DR3
  Conc: 100%
  Temp: 48°C/118°F
  US: optional
  Time: 2-5 min

  RINSING

• DRYING ZONE
  Conc: 100% DR3 vapor
  Temp: 61°C/142°F
  
  Time: 5-60 sec

  DRYING

BENEFITS

PROMOSOLV DR1 is especially designed to replace rinsing solvents with a high HSE impact and to offer a product in accordance with the latest and future environmental regulations. The very low surface tension allows to penetrate very tight or difficult to access spaces, making sure any cleaning chemistry is fully removed.

It can be used in combination with our TOPKLEAN^TM range in co-solvent cleaning process to offer an environmentally friendly solvent solution without compromising on high cleaning performance.

PROMOSOLV DR1 is compatible with all metals and alloys, including very sensitive ones. It has also good compatibility with most plastics & elastomers, however it is necessary to test before use.

This product also exists in a recycled version (made from recycled solvent) under the name PROMOSOLV DR1 T

PERFORMANCE	Thermally and chemically stable in use The very low surface tension allows deep cleaning & rinsing of parts with complex geometry Short cleaning, rinsing and drying times
COST	Continuous recycling in equipment for a long bath-life Can be returned for recycling and re-use The relative high boiling point reduces risk of solvent drag, so limiting consumption
HSE	Low Global Warming Potential (GWP) No Ozon Depletion Potential (ODP) Non-flammable & no flashpoint Low environmental impact: GREENWAY product

SPECIFICATIONS

SPECIFICATIONS	VALUES	METHODS
Aspect	Transparent, colorless	Visual
Methoxy-nonafluorobutane ethers (%)	95.5% +/- 0.5	Internal / MO.SB.10033
Isopropanol (%)	4.5% +/- 0.5	Internal / MO.SB.10033

CHARACTERISTICS

CHARACTERISTICS	VALUES
Boiling point (°C/°F)	55/131
Freezing point (°C/°F)	-135/-211
Flash point	No
Density (g/cm3)	1.48
Purity (% weight)	>99.5
Surface tension (dynes/cm)	14.5
Vapor pressure (kPa)	27.6
Dynamic viscosity (mPa.s)	0.75
Latent heat of vaporization (kJ/kg @bp)	165
Specific heat (kJ/kg.K)	1.17

PROCESS RECOMMENDATION

The best process will depend on factors such as operating conditions, equipment, desired cleaning time and the nature of contaminants. Our team is ready to advise you.

• Do not remove parts too quick out of the drying zone to prevent unwanted loss of solvent.
• A dedicated PCA Kit to monitor the bath status and compatibility report with different materials are available on request.

PROCESS EXAMPLE

Separated Co-Solvent

• TOPKLEAN EL 80
  Conc: 100%
  Temp: 60°C/140°F
  US: optional
  Time: 5-10 min

  CLEANING

• PROMOSOLV DR1
  Conc: 100%
  Temp: 55°C/130°F
  US: optional
  Time: 2-5 min

  RINSING

• PROMOSOLV DR1
  Conc: 100%
  Temp: 45°C/113°F
  US: optional
  Time: 2-5 min

  RINSING

• DRYING ZONE
  Conc: 100% DR1 vapor
  Temp: 55°C/130°F
  
  Time: 5-60 sec

  DRYING

Mixed Co-solvent

• TOPKLEAN EL 20P (70%)
  PROMOSOLV DR1 (30%)
  Conc: 70%/30%
  Temp: 67°C/153°F
  US: optional
  Time: 5-10 min

  CLEANING

• PROMOSOLV DR1
  Conc: 100%
  Temp: 45°C/113°Fbr> US: optional
  Time: 2-5 min

  RINSING

• DRYING ZONE
  Conc: 100% DR1 vapor
  Temp: 55°C/130°F
  
  Time: 5-60 sec

  DRYING